Product: RFID HF LED Label Series
Chip Type: FM11NT021TT
Resonant Frequency: 14.3+/-0.5MHz
Standard Protocol: ISO/IEC 14443-A
Working Temperature: -40~85°C
MOQ: 1000PCS
RFID Inlay carrying with luminous LED, used to produce any size label, helpful to indicate the item status and location info！
Through RFID reader or phone device, to read and query label with specific number, trigger Led-on brightly!
Support NFC, 14443A, 15693 chips, and enable traditional RFID printer amazing working!
Red or Green of LED color are available:
- When Label near to reader or phone, RFID chip could be Read & Write, at the same time LED shining.
Ultra-thin technology：
- Suitable for product which have the thinner thickness requirement of printing or label.
- Thickness of LED chip only 120um, special mass production technolgy
- The antenna adopts single etched aluminum bridge technology. After converting, the finished product thickness will be thinner than ordinary antenna with double etched aluminum！
Suitable for the printing of label
- Both luminous LED and NFC chip could meet the requirement of printing or converting！
Taking
FM11NT021TT as an example of NFC luminous label
|
Parameter |
Parameter Value |
Unit |
|
Chip Type |
FM11NT021TT |
|
|
Standard Protocol |
ISO/IEC 14443-A |
|
|
Resonant Frequency |
14.3+/-0.5 |
MHz |
|
Memory Capacity |
144 |
Bytes |
|
Working Temperature |
-40~85 |
°C |
|
Storage Condition |
20°C~30°C/20%~60%RH |
|
|
Reading Distance |
>=10mm(Base on HUAWEI NOVA7) |
|
|
Chip UID |
7 |
Bytes |
|
Data Storage |
100,000 times, More than 10 years |
|
|
Rate of Data Transmission |
106Kbit/s |
|
※ Common design structure: PET+Al Antenna
※ Antenna substrate: PET
※ Antenna material: Al etching
※ Inlay Size: Customized
※ LED Position: Customized
※ Antenna Layout: Could design
※ Working Mode: Passive
※ LED: Red, Green
※ Lighting method of LED, depends on the type of RFID chip.
※ LED brightness depends on LED chip, RFID antenna and reader performance.
