Tag-it™ HF-I Plus Transponder Inlays
Operating Frequency: 13.56MHz
Typical programming cycles: 100,000
Data retention time: >10 years
Typical quantity of good units per reel: 5,000
|
Recommended operating frequency |
13.56 MHz |
|
Factory programmed read-only number |
64 bits |
|
Memory (user programmable) |
2k bits organized in 64-bit × 32-bit blocks |
|
Typical programming cycles (at 25°C) |
100,000 |
|
Data retention time (at 55°C) |
>10 years |
|
Simultaneous identification of tags |
Up to 50 tags per second (reader/antenna dependant) |
|
Foil width |
48 mm ± 0.5 mm (1.89 in ± 0.02 in) |
|
Thickness |
Chip area: 0.34 mm ±0.02 Antenna area (Al both sides): 0.085 mm ±0.01 Antenna area (Al one side): 0.075 mm ±0.008 |
|
Base material |
Substrate: PET (Polyethylenetherephtalate) Antenna: aluminum |
|
Smallest bending radius allowed |
18 mm (~0.71 in) |
|
Tape tension (F), linear |
Maximum 10 N |
|
Operating temperature |
–25°C to 70°C |
|
Storage temperature (single inlay) |
–40°C to 85°C (warpage may occur with increasing temperature) |
|
Storage temperature (on reel) |
–40°C to 40°C |
|
ESD immunity |
Minimum 3.5 kV (Human-Body Model) Minimum 200 V (Machine Model) |
|
Delivery |
Single-row tape wound on cardboard reel with 500-mm diameter Reel outer width: approximately 60 mm (~2.36 in) Reel inner width: approximately 50 mm (~1.97 in) Hub diameter: 76.2 mm (3 in) |
|
Typical quantity of good units per reel |
5,000 |
Specification for RSTI-I11-112A, RI-I11-112B
|
|
PART NUMBER |
|
|
|
RSTI-I11-112A |
RSTI-I11-112B |
|
Passive resonance frequency (at 25°C) |
13.86MHz±200KHz(includes frequency offset to compensate further integration into paper) |
14.4MHz±200KHz(includes frequency offset to compensate PVC lamination) |
|
Typical required activation field strength read (at 25°C) |
98 dBmA/m |
98 dBmA/m |
|
Maximum required activation field strength read (at 25°C) |
101 dBmA/m |
101 dBmA/m |
|
Typical required activation field strength write (at 25°C) |
101 dBmA/m |
101 dBmA/m |
|
Antenna size |
45 mm × 45 mm (~1.77 in × ~1.77 in) |
|
|
Foil pitch |
48 mm +0.1mm/–0.4mm (~1.89 in) |
|
Specification for RSTI-I02-112A, RI-I02-112B
|
|
PART NUMBER |
|
|
|
RSTI-I02-112A |
RSTI-I02-112B |
|
Passive resonance frequency (at 25°C) |
13.86MHz±200KHz(includes frequency offset to compensate further integration into paper) |
14.4MHz±200KHz(includes frequency offset to compensate PVC lamination) |
|
Typical required activation field strength read (at 25°C) |
94 dBmA/m |
94 dBmA/m |
|
Maximum required activation field strength read (at 25°C) |
97 dBmA/m |
97 dBmA/m |
|
Typical required activation field strength write (at 25°C) |
97 dBmA/m |
97 dBmA/m |
|
Antenna size |
45 mm × 76 mm (~1.77 in × ~2.99 in) |
|
|
Foil pitch |
96 mm +0.1mm/–0.4mm (~3.78 in) |
|
Specification for RSTI-I03-112A
|
|
PART NUMBER |
|
|
RSTI-I03-112A |
|
Passive resonance frequency (at 25°C) |
13.86 MHz ± 200 kHz (includes frequency offset to compensate further integration into paper or PVC lamination) |
|
Typical required activation field strength read (at 25°C) |
107 dBmA/m |
|
Maximum required activation field strength read (at 25°C) |
109 dBmA/m |
|
Typical required activation field strength write (at 25°C) |
111 dBmA/m |
|
Antenna size |
22.5 mm × 38 mm (~0.89 in × ~1.5 in) |
|
Foil pitch |
48 mm +0.1 mm/–0.4 mm (~1.89 in) |
Specification for RSTI-I16-112A
|
|
PART NUMBER |
|
|
RSTI-I16-112A |
|
Passive resonance frequency (at 25°C) |
13.70 MHz ± 400 kHz (includes frequency offset to compensate further integration into paper or PVC lamination) |
|
Typical required activation field strength read (at 25°C) |
113 dBmA/m |
|
Maximum required activation field strength read (at 25°C) |
116 dBmA/m |
|
Typical required activation field strength write (at 25°C) |
116 dBmA/m |
|
Antenna size |
ø 24.2 mm +0.1 mm/–0.2 mm (~0.95 in) |
|
Foil pitch |
50.8 mm +0.1 mm/–0.3 mm (2 in) |
HAPPY TO HEAR YOUR MESSAGE
Related Product
RFID UHF Woven Laundry Tag
World wide UHF supported, Green products, ROHS, SGS compliance...
Learn More